3. 강의목표
The course deals with various issues involved in designing Products and Production Processes while providing opportunities for students to reflect on modern technology and its prospect. Students are expected to take initiatives on personal pursuit of knowledge relative to the issues raised during the entire lifecycle of product and production process design and implementation. In particular, topics covered in the course include: product lifecycle and manufacturing economics, machining and numerical control, automation and control, PLC programming, industrial communication, manufacturing system design & simulation, and some open issues for smart manufacturing. The course contains regular exercises and practical labs, and thus your programming skill and motivation are highly required.
4. 강의선수/수강필수사항
430 III ->330 II ->230 I
5. 성적평가
Grade criteria %
Lab#1: CAD/CAM 20%
Midterm Project: Production Simulation & Optimization 30%
Lab#2: PLC (Programmable Logic Control) 20%
Final Group Project: Process Monitoring & Fault Diagnostics 30%
Attendance & Participation: 3 absences -> grade change (e.g. A -> B), 6 absences -> fail
6. 강의교재
| 도서명 |
저자명 |
출판사 |
출판년도 |
ISBN |
|
Product Design and Development (Paperback/5th Ed.)
|
Karl Ulrich Steven Eppinger,
|
McGraw-Hill Higher Education)
|
2011
|
|
|
Automation, Production Systems, and Computer-Integrated Manufacturing
|
Mikell P. Groover
|
Pearson
|
2008
|
|
7. 참고문헌 및 자료
• Averill M. Law, 2013, Simulation Modeling and Analysis, 5th ed., McGraw-Hill Higher Education
• https://www.autodesk.com/products/fusion-360/machining-extension
• https://www.anylogic.com/
• https://www.openplcproject.com/ https://plcopen.org/
8. 강의진도계획
Week Topic
1 Product Lifecycle & Manufacturing,
Manufacturing Processes: Machining/Casting/Forming/Joining/3D Printing
Machining and Numerical Control
2 CAD/CAM (Lab) Fusion 360
3 CAD/CAM (Lab) Fusion 360, 3D Printing (Makerspace)
4 Manufacturing Economics, Simulation Modelling & Analysis
5 Simulation Modelling & Analysis
6 Production Simulation & Optimization (Midterm Project) AnyLogic
7 Production Simulation & Optimization (Midterm Project)
8 Midterm break
9 Automation and Control, Discrete Control and PLCs (LD, FBD)
10 PLC (Lab), Raspberry Pi + OpenPLC, Factory I/O
11 PLC (Lab) Raspberry Pi + OpenPLC, Factory I/O
12 Inspection Techniques, Quality Control,
Signal Conditioning and Fourier Transform
13 Machine Learning and SVM
14 Monitoring & Fault Diagnostics (Final Group Project)
15 Monitoring & Fault Diagnostics (Final Group Project)
16 Manufacturing Paradigm: AI, Digital Twin, Autonomy
9. 수업운영
- Lecture, Lab Exercises, Projects, Team Projects
10. 학습법 소개 및 기타사항
2020학번부터는 IMEN330 (실습위주)을 반드시 2학기에 수강하여하함.
★2016학번부터 전공공통필수과목이며, 2015이전학번은 IMEN232 제품생산공정(3-0-3) 대체과목임
★2008~2015 학번의 대체과목 및 이수방법
(1) IMEN232 제품생산공정(3-0-3) 미이수자는 IMEN230 제품생산공정설계I(2-1-2)과목을 이수해야 하며, 부족한 1학점은 선택과목에서 추가 이수하여 졸업학점을 충족해야 함.
(2) IMEN390 공학설계i(1-1-1) 미이수자는 IMEN330 제품생산공정설계II(2-1-2)과목을 이수해야 하며, 초과된 1학점은 졸업이수학점으로 인정함.
(3) IMEN490 공학설계II(1-2-2) 미이수자는 IMEN430 제품생산공정설계III(2-1-2)과목을 이수해야 함.
11. 장애학생에 대한 학습지원 사항
- 수강 관련: 문자 통역(청각), 교과목 보조(발달), 노트필기(전 유형) 등
- 시험 관련: 시험시간 연장(필요시 전 유형), 시험지 확대 복사(시각) 등
- 기타 추가 요청사항 발생 시 장애학생지원센터(279-2434)로 요청